4 Oz PVC Trim Glue, Waterproof Adhesive for Miter, Scarf & Shiplap Joints | For column wraps, molding, millwork, baseboards & ceiling trim; fast-setting, dries white for interior and exterior PVC trim

This 4 fl oz (120 mL) PVC trim joint adhesive is designed for professional installers and DIY trim projects. It bonds PVC trim joints and PVC-to-wood contact areas, including miter, scarf and shiplap joints, column wraps, molding, millwork, baseboards, ceiling trim, fascia and decorative PVC boards. The thick no-sag gel helps keep the adhesive where it is applied, including vertical joints. It dries white for a cleaner finish and forms a waterproof bond after full cure. The cured joint can be sanded or painted after 24 hours. How to use: Cut the precision tip to the bead size needed. Make sure both bonding surfaces are clean and dry. Apply an even bead along the joint line. For larger joints, apply a thin bead to both contact surfaces for additional alignment time. Join the pieces promptly, align within about 30 seconds, and hold firmly or clamp. Wipe away excess adhesive before it cures. Allow 24 hours for full cure before sanding, painting or placing the joint into regular use. Important: Waterproof performance applies after the adhesive has fully cured. Do not apply to wet surfaces. Not intended for pressurized plumbing pipes, potable water systems, PP, PE, TPE or submerged applications. After opening, close the cap tightly and store in a cool, ventilated place; refrigeration at 5-15°C is acceptable

• Made for PVC Trim Joints – Professional PVC trim glue for miter, scarf and shiplap joints, column wraps, molding, millwork, baseboards and ceiling trim. Creates a high-strength, lasting bond for PVC-to-PVC and PVC-to-wood contact areas
• Fast-Setting with Alignment Time – Apply to clean, dry bonding surfaces, join the pieces promptly, and align within about 30 seconds. Hold firmly or clamp the joint, then allow 24 hours for full cure before sanding, painting, or regular use
• Dries White for a Seamless Finish – The cured adhesive blends with white PVC trim for cleaner visible seams. Once fully cured, the bonded area can be sanded or painted to match the finished trim project
• Waterproof After Full Cure – Apply only to clean, dry bonding surfaces. The thick no-sag gel helps the bead stay in place on vertical trim joints. After a full 24-hour cure, the bond is waterproof for interior and exterior PVC trim projects
• Precision 4 fl oz Bottle – 120 mL squeeze bottle with an inner seal, precision tip cap and leak-resistant closure for controlled use. For interior and exterior PVC trim projects; not for plumbing pipes, potable water systems, PP, PE, TPE or submerged use